Products Catalog: Compressed Non-Asbestos Jointing Sheets - Hefei Kaidi Sealing Mfg. Co., LTD.

Products Catalog: Compressed Non-Asbestos Jointing Sheets

Specification:

This products is made from " Kevlar" Aramid fiber, Vegetable fiber, Mineral fiber with high quality NR, NBR or SBR compressed and calendered under high temperature and pressure into a sheet form. It eliminates asbestos-rubber sheet essentially and thoroughly.

CNA1000 Non-asbestos Sheets
Characteristic:
High quality non-asbestos fiber with NR binding.

Application:
Temperature: 250 Deg.C
Pressure : 70bar
Density 1.90g/ cm3
Tensile Strength 1.4kg/ mm2 Min
Compressibility 7-17%
Recovery 40% Min

CNA2000 Non-asbestos Sheets
Characteristic:
High quality non-asbestos fiber with NBR binding.

Color: Red, Green, Blue

Application:
Temperature : 300 Deg.C
Pressure : 100BAR
Density 1.90g/ cm3
Tensile Strength 1.4kg/ mm2 Min
Compressibility 7-17%
Recovery 45% Min
Suitable for good sealing performance under hot oil, oil gas, etc

CNA3000 Non-asbestos Sheets
Characteristic:
Kevlar Fibers, NBR and Non Asbestos Fiber Fillers Binding.

Color: Gray, Blue, Green, White, Red

Application:
Temperature: 370 Deg.C Max
Pressure: 120Bar
Density 1.90g/ cm3
Compressibility 7-17%
Recovery 45% Min
Suitable for Flange Gaskets Seals. Pipeline seals, Valve seals, Water, saturated steam, mild chemicals, refrigerants, oils, fuels, Gasoline etc.

CNA4000 Non-asbestos Sheets
Characteristic:
High quality non-asbestos fibers with carbon fiber and NBR binding

Color: Black, Gray

Application:
Temperature: 450 Deg.C Max
Pressure: 120Bar
Density 1.90g/ cm3
Tensile Strength 1.4kg/ mm2 Min
Compressibility 7-17%
Recovery 45% Min
Suitable for Saturated steam, water, inert gases, mild acids and alkalies.

CNA5000 Wire Reinforced Non-asbestos Sheets
Characteristic:
Non-Asbestos gasket material with stainless steel wire-mesh inserted to be suitable for high temperature and high pressure. Manufactured by the hot calender process using high quality non asbestos fibers and oil-resistant rubber.

Color: Black, Green, Blue

Application:
Temperature: 430 Max
Pressure: 120kg/ cm2 Max
Density 2.00g/ cm3
Compressibility 7-17%
Recovery 40% Min
Suitable for Water, Hot Oil, Oil Gas Alkali, Salt Solution, Solvents, Steam, Strong Acid and Alkali, Soluble Chemicals..

Standard Size:
1500* 1000mm, 1500* 2000mm
1500* 1350mm, 1500* 4000mm
1270* 1270mm, 1270* 3810mm
Thickness: 0.4mm to 6.4mm

Request for Quote

Your inquiry will be recorded in "Member Trade Mail".

Recommend to your friends